Start-Up - Homematic Hmip-Krc Bedienungsanleitung

5

Start-up

Please read this entire section before starting to
use the device.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to the
Homematic IP User Guide, available for download
in the download area of www.eQ-3.de.
To integrate the key ring remote control into your system
and enable it to communicate with other Homematic IP
devices, you must teach-in the device to your Homemat-
ic IP Access Point first.
To teach-in the key ring remote control, please proceed
as follows:
• Open the Homematic IP app on your smart-
phone.
Select the menu item "Teach-in device".
•
Open the battery compartment (G) at the rear
•
by pushing the battery compartment cover away
Start-up
27