FLAEM AlphaNeb4.0 Betriebsanleitung Seite 21

DURATION
Model: P0707EM-1 F400
(Compressor unit)
Model: RF9-1
(Nebuliser and accessories)
EQUIPMENT AND MATERIAL INFORMATION
The equipment includes:
Compressor unit - Model: P0707EM-1 F400
A1 - Switch
A2 - Air intake
A3 - Air filter
A -
A4 - Nebuliser holder
A5 - Carrying handle
A6 - Power cable
A7 - Cable storage compartment
Nebuliser and accessories - Model: RF9-1
B1 -Connecting tube (compressor/nebuliser unit)
B2 - RF9 Nebuliser
B2.1 - Lower part
B2.2 - Nozzle
B2.3 - Upper part
B2.4 - Complete particle size regulator
B -
B2.4a - Regulator
B2.4b - Valve
B2.4c - Selector
B3 - Mouthpiece Mouthpiece with valve
B3.1 - Expiratory valve
B3.1 - Non-invasive nasal piece
B4 - Paediatric SoftTouch mask
B5 - Adult SoftTouch mask
C -
Accessory pouch
IMPORTANT NOTE: There is an identification label on the packaging, remove it and affix it in
the spaces provided on page 2. When replacing the Nebuliser and accessories, perform the
e
same procedure.
ASSEMBLING THE NEBULISER
e
Follow the assembly instructions below.
1. Assemble the nozzle (B2.2) on the upper part (B2.3).
B2.2
Service life 400 hours.
The expected average life is 1 year, however it is advisable to replace the
nebuliser every 6 months during intensive use (or sooner if the nebulis-
er is clogged) to ensure maximum therapeutic effectiveness.
B2.3
B2.3
B2.2
Information on materials
Polypropylene
Polypropylene +
Thermoplastic Elastomers
B2.3
B2.2
B2.3
B2.2
21