Markibar IZAGA Betriebsanleitung Seite 39

Quick-change operation.
This working mode allows you to switch between pre-grind and on-demand
doses easily by using the "+" and "-" keys from the main working screen.
If this working mode is selected, the message will appear on the screen as
.
follows:
When in pre-grind mode:
.
When in on-demand mode:
The diagram on the right side of the display shows if the dispenser is full or
empty. When switching from pre-grind to on demand the diagrams
indicating that the dispenser has to be emptied are as follows:
.
To switch from one mode to the other, press and hold the + or - keys:
When in pre-grind mode: press and hold down the - key to switch to
.
on- demand mode.
.
When in on-demand mode:
.
Press and hold down the + key to switch to pre-grind mode.
Pressing - shortly will grind a microdose to complete the dose in
the filter:
For IZAGA W there is another mode: C2_ONLY_PRECISE
This mode is targeted for users requiring a very accurate C2 dose only
together with a quick workflow.
The user can also change to ONDEMAND mode by pressing Key – (and
reverse by pressing Key +).
39