Herunterladen Inhalt Inhalt Diese Seite drucken

1Control LINK Kurzanleitung Seite 7

Vorschau ausblenden Andere Handbücher für LINK:
Inhaltsverzeichnis

Werbung

Correct placement - sensor for door
Make sure that when the door is closed, the components
of the sensor are close to each other. In particular, it is
important that the smaller component of the sensor is near
the reference notch of the larger component, as shown in the
fi gure.
On the other hand, when the door is open, the components of
the sensor should be apart.
Also, ensure that the opening sensor is within 15 meters of
your 1Control LINK so it can be detected.
12
IT
Corretto posizionamento - sensore per porta
Assicurati che quando la porta è in stato chiuso le componenti del sensore
siano vicine. In particolare è importante che la componente più piccola del
sensore sia vicina alla tacca di riferimento della componente più grande come
rappresentato in fi gura.
Al contrario quando la porta è aperta le componenti del sensore devono
essere distanti l'una dall'altra.
Assicurati inoltre che il sensore di apertura sia entro 15 metri dal tuo 1Control
LINK in modo che possa essere rilevato.
FR
Placement correct - capteur pour porte
Assurez-vous que lorsque la porte est fermée, les composants du capteur
sont proches les uns des autres. En particulier, il est important que le plus petit
composant du capteur soit proche de l'encoche de référence du plus grand
composant, comme indiqué sur la fi gure.
D'autre part, lorsque la porte est ouverte, les composants du capteur doivent
être éloignés l'un de l'autre.
Assurez-vous également que le capteur d'ouverture se trouve à moins de 15
mètres de votre 1Control LINK pour qu'il puisse être détecté.
DE
Richtige Platzierung - Türsensor
Stellen Sie sicher, dass die Komponenten des Sensors nahe beieinander
sind, wenn die Tür geschlossen ist. Es ist besonders wichtig, dass die kleinere
Komponente des Sensors in der Nähe der Referenzkerbe der größeren
Komponente ist, wie in der Abbildung gezeigt.
Wenn die Tür geöff net ist, sollten die Komponenten des Sensors hingegen
auseinander sein.
Stellen Sie außerdem sicher, dass sich der Öff nungssensor in einem Umkreis
von 15 Metern zu Ihrem 1Control LINK befi ndet, damit er erkannt werden kann.
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis