Hameg HM8115-2 Handbuch Seite 25

8 kW Power Meter HM8115-2
Valid at 23 °C after a 30 minute warm-up period
Voltage True RMS voltage measurement (AC+DC)
Ranges: 50 V
Resolution: 0.1 V
Accuracy: 20 Hz – 1 kHz:
DC:
Input impedance: 1 MΩ II 100 pF
Crest factor: max. 3.5 at full scale
Input protection: max. 500 V
Current True RMS current measurement (AC+DC)
Ranges: 160 mA
Resolution: 1 mA
Accuracy: 20 Hz – 1 kHz:
DC:
Crest factor: max. 4 at full scale
Input protection: fuse, FF 16 A 6.3 x 32 mm (superfast)
Active power measurement
Ranges: 8 W 24 W
Resolution: 1 mW 10 mW 10 mW 100 mW 100 mW
Accuracy: 20 Hz – 1 kHz:
DC:
Display: 4-digit, 7-segment LED
Reactive power measurement
Ranges: 8 var 24 var
Resolution: 1 mvar 10 mvar
Accuracy: 20 Hz – 400 Hz: ± (2.5 % + 10 digits + 0.02 x P)
P = active power
Display: 4-digit, 7-segment LED
Apparent power measurement
Ranges: 8 VA 24 VA
Resolution: 1 mVA 10 mVA
Accuracy: 20 Hz – 1 kHz:
Display: 4-digit, 7-segment LED
Power factor measurement
Display: 0.00 to +1.00
Accuracy: 50 Hz–60 Hz:
voltage and current › 1/10 of full scale
Monitor output (analog)
Connection: BNC connector (galvanic isolation
to test circuit and RS-232 interface)
Reference potential: protective earth
Level: 1 V
AC
Accuracy: typ. 5 %
Output impedance: approx. 10 kΩ
Bandwidth: DC to 1 kHz
Protected up to: ± 30 V
Functions and displays
Measurement functions: voltage, current, power, power factor
Range selection: automatic/manual
Overrange alarm: visual and acoustic
Display resolution
Voltage: 3-digit, 7-segment LED
Current: 4-digit, 7-segment LED
Power: 4-digit, 7-segment LED
Power factor: 3-digit, 7-segment LED
Interface
Interface: RS-232 (standard), IEEE-488 or USB (opt.)
Connection RS-232: D-sub connector (galvanic isolation
to test circuit and monitor output)
Protocol: Xon / Xoff
Data rate: 9600 Baud
Functions: control/data fetch
HM8115-2E/170408/ce · Subject to alterations · © HAMEG Instruments GmbH · ® Registered Trademark · DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 800 0 · Fax +49 (0) 6182 800 100 · www.hameg.com · info@hameg.com
150 V 500 V
1 V 1 V
± (0.4 % + 5 digits)
± (0.6 % + 5 digits)
P
1.6 A 16 A
1 mA 10 mA
± (0.4 % + 5 digits)
± (0.6 % + 5 digits)
80 W 240 W 800 W 2400 W 8000 W
1 W
± (0.5 % + 10 digits)
± (0.5 % + 10 digits)
80 var 240/800 var 2400/8000 var
10 mvar 100 mvar
80 VA 240/800 VA 2400/8000 VA
10 mVA 100 mVA
± (0.8 % + 5 digits)
± (2% + 3 digits) (sine wave)
at full scale (2400/8000 digits)
A Rohde & Schwarz Company
Miscellaneous
Safety Class:
Power supply:
Power consumption:
Operating temperature:
Max. relative humidity:
Dimensions (W x H x D):
Weight:
Accessories supplied: Operator's Manual, power cable, software
Optional accessories:
HZ10S/R Silicone test lead
HZ815 Socket adapter
HO870 USB Interface
HO880 IEEE-488 (GPIB) Interface
1 W
1 var
1 VA
S p e c i f i c a t i o n s
Safety Class I (EN 61010)
115/230 V ± 10 %, 50/60 Hz
approx. 15 W at 50 Hz
0° to +40 °C
‹ 80 % (without condensation)
285 x 75 x 365 mm
approx. 4 kg
Subject to change without notice
25