Specifications; Engine Specification; Machine Specification - Ransomes Super Certes 51 Bedienungsanleitung Und Wartungsanleitung

4

SPECIFICATIONS

4.1

ENGINE SPECIFICATION

All 51 and 61 Machines:
TYPE: Honda 2.9kW / 3600 RPM,
single cylinder, air cooled 4
stroke OHV petrol engine 25°
inclined cylinder, horizontal
shaft.
Model: GX120 K1-QX4
Maximum Speed: 2700 ± 50 RPM (No load).
Idle Speed: 1400 + 200 -150 RPM
Oil Sump Capacity: 0.6 litres
Fuel: Lead free petrol
Fuel tank capacity: 2.5 litres
4.2

MACHINE SPECIFICATION

Frame
construction: Pressed Steel welded
fabrication.
Transmission: Poly Vee & Synchrunos belts
Clutches: Transmission clutch.
Separate cylinder clutch.
Separate landroll clutch
Front roll
Super Certes/Bowl:One piece steel roll running on
ball bearings.
Marquis: Four piece wood roll.
Landroll
Super Certes: Two piece Aluminium with bevel
gear differential.
Super Bowl: Two piece smooth cast iron with
bevel gear differential.
Marquis: Two piece ridged cast iron with
bevel gear differential.
Cutting cylinder
Super Certes/Bowl: All welded 10 knife cylinder
running on ball bearings.
Marquis 51: All welded 6 knife cylinder
running on ball bearings.
GB-8
RANSOMES SMALL PEDESTRIAN RANGE
SAFETY, OPERATORS & MAINTENANCE MANUAL
Marquis 61:
Cutting ratio
Marquis:
Super Bowl:
Super Certes:
Height of cut
Marquis:
Super Certes/
Super Bowl:
Handles:
Grass box:
Cutting width:
Cutting performance
Ground pressure
All welded 5 knife cylinder
running on ball bearings.
51cm: 85 cuts / metre
61cm: 71cuts / metre
142 cuts / metre
138cuts / metre
6 - 27mm
3 - 13mm Standard Blade
1.5 - 11.5mm Thin Blade
Tubular steel adjustable at
bottom.
Moulded polyethelene.
51cm
61cm
51cm machine: 1110 sq. m./hr
61cm machine: 1660 sq. m./hr
51cm: 0.28 kg./cm 2
2
61cm: 0.32 kg./cm