Werbung
Pando Ovens
At any time, you can modify the remai-
ning cooking time by touching
until the symbol
Then, touch
Cooking Duration and End Time
Programming
1. Press
or
until the symbol
the screen, then press
show 00:00
2. Select the cooking duration by touching
or
. Then, you'll hear 2 beeps, the remai-
ning cooking time will be displayed on the
screen, and the symbol
3. Touch
or
on the screen, then press
cooking completion time will be displayed on
the screen.
4. Adjust the cooking completion time by tou-
ching
or
. You'll hear 2 beeps, and the
current time will be displayed on the screen.
5. Select a cooking function and a cooking tem-
perature. The oven will remain off, and the
symbols
and
oven is now programmed.
6. When the cooking start time is reached, the
oven will start, and cooking will be carried out
for the selected duration.
7. During cooking, the remaining cooking time
will be displayed, and the symbol
slowly.
8. Alcanzada la hora de finalización que se había
programado, el horno se desconectará, sona-
rá una señal acústica y el símbolo
deará rápidamente.
9. Touch any sensor to stop the audible signal
and turn off the symbol
turn back on.
10. Set the controls to the off position
off the oven.
or
blinks rapidly.
to modify the time.
blinks on
.
The display will
will blink slowly.
until the symbol
. The expected
will be illuminated. Your
will blink
parpa-
, and the oven will
to turn
At any time, you can modify the remaining
cooking time by touching
bol
blinks rapidly. Then, touch
the time.
Control Panel Lock
This function can be selected at any time during
oven use.
To activate the function, press
more than 4 seconds until you hear 1 audible beep
and the symbol
play is locked. If the oven is off and you activate the
child lock, the oven will not cook even if you select a
cooking function.
If you activate this function while cooking with the
oven, it will only lock the manipulation of the electro-
nic clock.
blinks
To deactivate the function, press
key until you hear 1 audible beep.
Door Manual Lock
Available only in pyrolytic models.
This function allows you to lock the oven door.
This function can only be selected when
the oven control knob is in the standby
Once the door is locked, you can start
To activate/deactivate the door lock, follow these
steps:
1. Touch
the screen.
The current status of the door lock will be dis-
played: "On" if it's active and "Off" if it's deac-
tivated.
2. Touch
lock will start closing if it was "Off" and opening
if it was "On".
or
and hold the key for
appears on the display. The dis-
IMPORTANT
position.
cooking normally.
or
until the symbol
. Then you'll hear a beep, and the
Integral Cooking
Integral Cooking
English
until the sym-
to modify
and hold the
blinks on
83
83
Werbung
