Hirschmann RS20 Handbuch Seite 23

EtherNet/IP
Bit 1 RW
Bit 2 RO
Bit 4-6 RW
Bit 8-10 RW
Switch Existing Id 06
Ports
Per Bit starting
with Bit 0
(=Port 1)
Switch Port Id 07
Control
Per Bit starting
with Bit 0
(=Port 1)
Switch Ports Id 08
Mapping
Starting with
Index 0 (=Port
1)
Switch Action Id 0x9
Status
Bit 0
Bit 1
Tab. 6: Hirschmann Ethernet Switch Agent Objekt
1. RS20/RS30/RS40, MS20/MS30, OCTOPUS, Power MICE und MACH 1000: 32 bit
MACH 4000: 64 Bit
Das Hirschmann-spezifische Ethernet Switch Agent Object bietet Ihnen den
zusätzlichen herstellerspezifischen Service mit dem Service-Code 0x35 zum
Abspeichern der Switchkonfiguration. Der Switch beantwortet die Aufforde-
rung zur Konfigurationsabspeicherung, sobald er die Konfiguration im Flash-
Speicher gespeichert hat.
Industrie-Protokolle
Release 3.1 06/07
IGMP Querier (1=enabled, 0=disabled)
IGMP Querier Mode (1=Querier, 0=Non-Querier)
IGMP Querier Packet Version V1 = 1 V2 = 2 V3 = 3 Off = 0
(IGMP Querier disabled)
Treatment of Unknown Multicasts (Railswitch only): 0 = Send
To All Ports 1 = Send To Query Ports 2 = Discard
1
ARRAY OF DWORD
1=Port existing, 0=Port not available. Array (bit mask) size is
adjusted at the size of maximum number of Switch ports (e.g.
max. 28 Ports => 1 DWORD is used (32bit)).
1
ARRAY OF DWORD
Ports
0=Port enabled, 1=Port disabled. Array (bit mask) size is
adjusted at the size of maximum number of Switch ports
(e.g. max. 28 Ports => 1 DWORD is used (32bit)).
ARRAY OF USINT (BYTE, 8 bit) RO Instance number of the
Ethernet-Link-Object
All Ethernet Link Object Instances for the existing Ethernet
Switch Ports (1..N, maximum number of ports). When the entry
is 0, the Ethernet Link Object for this port does not exist.
DWORD (32 bit) RO
Flash write in progress
Flash write failed
2.2 EtherNet/IP-Parameter
RO Bitmask of existing Switch Ports
RW Bitmask Link Admin Status Switch
23