Create Soda Maker Studio Bedienungsanleitung Seite 8

Before starting to use this appliance, please read the basic safety warnings carefully. Re-
member that the gas bottle is not included with the machine, it must be supplied separately
and always follow the supplier's precautions for use.
1. Remove the top cover of the machine by unscrewing it from the body of the machine.
2. Carefully insert the gas bottle into the cap by turning it clockwise. Before inserting the gas
bottle, carefully read and follow your supplier's instructions for correct use.
3. Place the bottle next to the cap inside the gas bottle compartment and then turn clockwise to
fix the cap to the main body. Make sure it is correctly positioned and closed before use.
4. Rinse the bottle with warm water before using it for the first time. Fill the PET bottle with
drinking water. Never exceed the maximum quantity mark or fill less than the minimum
capacity mark shown on the bottle.
5. Once filled, properly close the cap of the bottle.
6. Then carefully place the bottle in the machine, put the base on the bottle holder and match
the cap with the nozzle on the top of the bottle.
E NGL I SH
8
HOW TO USE
7. Press the carbonation lever for 1 to 2 seconds to
make your carbonated beverage.
8. For best results, press the gassing lever 2 or 3 more
times with a duration of 1 or 2 seconds each time.
Note: Stop when you hear a beep, this means that the
pressure relief valves are letting the gas out and the
cylinder has reached its maximum capacity.