Pkm IN4B-2 Bedienungsanleitung Seite 42

2. Touch the
TIMER
indicates 00.
3. Set he desired time using the + and - sensor.
a. Touch +/- once to increase/decrease the
value by 1 minute.
b. Hold +/- to increase/decrease the value by 10
minutes.
4. Touch - again to cancel the timer. The display
indicates 00.
5. When you have finished the setting, the count-
down of the set time starts. The display
indicates the remaining time. The timer indicator
flashes for 5 seconds.
6. When the set time has elapsed, an acoustic
signal sounds for 30 seconds. The timer
indicates --.
Mode 2. Automatic switch-off function of one cooking zone.
1. Touch the
sensor you want to control via the timer.
2. Touch the
TIMER
flashes and indicates 30.
3. Set he desired time using the + and - sensor.
a. Touch +/- once to increase/decrease the
value by 1 minute.
b. Hold +/- to increase/decrease the value by
10 minutes.
4. Touch - again to cancel the timer. The
display indicates 00.
5. When you have finished the setting, the
count-down of the set time starts. The
display indicates the remaining time. The
timer indicator flashes for 5 seconds.
6. The red dot next to the power level indicator
-sensor; the display flashes and
SELECTION OF COOKING ZONE
-sensor; the timer indicator
-
42