How To Stop Cooking; Key Lock - Pkm In4B-2 Bedienungsanleitung

a. When you do not set a power level within 1
minute, the appliance will switch off automatically.
You have to start at step 1 again.
b. You can change the power level whenever you
want while cooking..
The display indicates
 You have not placed the cookware on the correct zone, or
 You use unsuitable cookware, or
 You use cookware which is too small or not centred properly on the cooking
zone.
 While using unsuitable cookware, the cooking zone does not heat up. The
display goes off automatically after 1 minute even if you have not placed
suitable cookware on the cooking zone.

3.5 How to stop cooking

1. Touch the
SELECTION OF COOKING ZONE
cooking zone you want to switch off.
2. Switch off the relevant cooking zone by setting the -
sensor to 0. Check that the indicator displays 0 and
then H.
3. Switch off the appliance with the O
4. Beware of the hot surfaces of the cooking zones! An
H indicates which cooking zones are still hot. The H
disappears as soon as the relevant cooking zone has
cooled down. You can use the H for saving energy
→ you can start a new cooking procedure on a
cooking zone which is still warm/hot.

3.6 Key lock

You can lock the sensors to protect them from unintentional operation or
operation by children. When the sensors have been locked, all sensors except
ON/OFF are deactivated. You can switch off the appliance with the ON/OFF
sensor in case of emergency, but you should unlock the sensors afterwards.
↔ indicator of the power level alternately.
N
40
-sensor of the
/O -sensor.
FF