Daily Use - Electrolux WASL6E202 Benutzerhandbuch

2. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
9.1 Language setting
The first time you activate the appliance,
the display shows the default language
and tells you to confirm it or change it:
1. Turn the programme knob to set the
desired language.
2. When the display shows the
necessary language touch Start/Pause
- Départ/Pause button to confirm the
selection.
9.2 Change the language after
the first activation
1. Touch button Schleudern - Essorage
and button Vorwäsche/Flecken -
Prélavage/Taches at the same time for
some seconds.
2. When the display shows the language
set, turn the programme knob to set
the new language.
3. Touch Start/Pause - Départ/Pause
button to confirm the selection.
9.3 Clock setting
After you set the language, the display
tells to set the clock. The hour digits flash.

10. DAILY USE

WARNING!
Refer to Safety chapters.
10.1 Using weight sensors
For a correct operation of the
weight sensor, activate the
appliance and set the
programme BEFORE you put
the laundry in the drum.
10.2 Before activating the
appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
1. Turn the programme knob to change
the hour.
2. Touch Start/Pause - Départ/Pause
button to confirm the selection.
The minute digits flash.
3. Turn the programme knob to change
the minutes.
4. Touch Start/Pause - Départ/Pause
button to confirm the selection.
9.4 Change the time of the day
after the first activation
1. Touch the button Spülen + - Rinçage
+ and the button Zeit Sparen - Court
at the same time for some seconds.
The hour digits flash.
2. Turn the programme knob to change
the hour.
3. Touch Start/Pause - Départ/Pause
button to confirm the selection.
The minute digits flash.
4. Turn the programme knob to change
the minutes.
5. Touch Start/Pause - Départ/Pause
button to confirm the selection.
10.3 Activating the appliance
and setting a programme
1. Press button Auto Off to activate the
appliance.
2. Turn the programme knob to the
necessary programme or touch one of
the Memory - Mémoire buttons to set
a memorised programme.
The programme indicator comes on.
The indicator of Start/Pause - Départ/
Pause button flashes with red colour.
The display shows the default temperature
and spin and the empty indicator bars of
the available functions.
3. If it is necessary, touch Temp. button
and Schleudern - Essorage button to
ENGLISH 17