Texas A/S Fusion 10TG Bedienungsanleitung Seite 18

1. Long-term exposure to noise levels exceeding
85 dB (A) are damaging. Always use ear
defenders when the machine is being used.
2. Reduce the running speed of the motor to
reduce vibration and noise levels.
3. To reduce noise levels further, only use
the machine in an open environment.
4. Vibrations can be reduced further by holding
the handle firmly.
5. To avoid disturbing others, the machine should
only be used during the daytime.
6. Always wear close-fitting work clothes, hard-
wearing work gloves, ear defenders and non-
slip boots with steel toecaps.
7. Take a 30-minute break every 2 working hours.
8. A worn belt has to be replaced/ serviced
by a authorized dealer
18