Notes For Disposal; Information And Service; Warranty - Gastroback Design Kaffeemühle Advanced Bedienungsanleitung

STORAGE
Always clean the appliance before storing (see ›Care and Cleaning‹). Ensure to store
the appliance where it is clean, dry and safe from frost, direct sunlight and inadmissible
strain (mechanical or electric shock, heat, moisture) and where it is out of reach of young
children. Place the appliance on a clean and stable surface, where it can not fall. Do
not place any hard or heavy objects on the appliance.

NOTES FOR DISPOSAL

Dispose of the appliance and packaging must be effected in accordance with
the corresponding local regulations and requirements for electrical appliances
and packaging. Please contact your local disposal company.
Do not dispose of electrical appliances as unsorted municipal waste, use sepa-
rate collection facilities. Contact your local government for information regarding the
collection systems available. If electrical appliances are disposed of in landfills, dumps,
or refuse incineration, hazardous substances can leak into the groundwater or can be
emitted into air, thus getting into the food chain, and damaging your health and well-
being as well as poisoning flora and fauna. When replacing old appliances with new
once, the vendor is legally obligated to take back your old appliance for disposal at
least for free of charge.

INFORMATION AND SERVICE

Please check www.gastroback.de for further information. For technical support, please
contact Gastroback Customer Care Center by phone: +49 (0)4165/22 25-0 or e-mail
info@gastroback.de.
Please refer to our home page for a copy of these operating instructions in pdf format.

WARRANTY

We guarantee that all our products are free of defects at the time of purchase. Any
demonstrable manufacturing or material defects will be to the exclusion of any further
claim and within 2 years after purchasing the appliance free of charge repaired or
substituted. There is no Warranty claim of the purchaser if the damage or defect of the
appliance is caused by inappropriate treatment, over loading or installation mistakes.
The Warranty claim expires if there is any technical interference of a third party without
a written agreement. The purchaser has to present the sales slip in assertion-of-claim and
has to bear all charges of costs and risk of the transport.
30