Gastroback Design Kaffeemühle Advanced Bedienungsanleitung Seite 27

IMPORTANT: Do not forget to empty the Coffee Container from time to time when
grinding coffee beans.
ATTENTION: Do not operate this appliance for longer than 2 minutes at a time as this
could cause overheating. Allow to cool for at least 2 minutes after each use. Allow appli-
ance to cool down for 10-15 minutes after long operation.
ATTENTION:
Only take the Coffee Bean Container of the motor housing when it is
completely empty. The bottom of the Coffee Bean Container is open. Lifting the Coffee
Bean Container the content falls out.
4. As soon as the Grinding Gear stopped you can take out the content of the Coffee
Container.
ATTENTION: Do not use force when the Grinding Gear stocks or stalls. Foreign sub-
stance might be wedged in the Grinding Gear. Turn the appliance OFF ›O‹, unplug the
appliance and clean the appliance according to the instructions ›Care and Cleaning‹.
Try to put the appliance back to operation. If the Grinding Gear is still not running take
the appliance for technical maintenance and repair to an authorised specialised repa-
ration shop.
5. Turn the appliance OFF ›O‹, wait until the motor stops and unplug the appliance
before assembling/disassembling or storing.
GRIND SELECTOR CONTROL
With the different settings on the Grinding Gear you have influence on the coffee you
will get. You can choose the desired fineness of grind on the Coffee Bean Container.
You will find the grind selection following:
Coarse - Percolator:
Fineness: coarse grained - for coffee in a percolator
Medium - Plunger:
Fineness: medium grained - for coffee in a plunger
Fine - Filter:
Fineness: fine grained- for filter coffee, espresso, latte machiatto, cappuccino.
Choose the finest setting for turkish coffee.
ATTENTION: If the Coffee Bean Container is filled with coffee beans you
can only change the Grinding Selector setting while the motor is running!
27