probst SVZ-UNI-VARIO Betriebsanleitung Seite 55

Maintenance and care
STABILIZER
1
GUIDE SHAFT
Keep head shaft free of dirt.
Grease if necessary the upper and lower range of the guide shaft (see
arrows).
The manufacturer of the device does not take over any adhesion for malfunctions, which are to due to
maintenance periods not taken place, rough contamination and maintenance lacking.
AUTOMATIC-RELEASE
Never grease or oil the automatic-release!
Clean with high-pressure cleaner when the automatic-release is dirty.
The distance (A) between stabilizer (1) and bracket
fulcrum (2) must be equal large with all three
stabilizer.
Differently large distances are referring to bent
stabilizer (1).
A
●
Verbogene Auflagen (1) korrigieren.
●
Correct bent stabilizer (1).
2
23 / 25
Guide shaft