P
OSSIBLE CAUSE
1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
5. The voltage is too low.
6. The « S
/
TART
not pressed.
1. The appliance is not installed on a
level, dry and solid floor.
2. The appliance is in contact with a
wall or another item.
3. Incorrect programme selection.
4. The fluff filter(s) is / are clogged.
5. Incorrect load volume.
1. The appliance is not installed on a
level, dry and solid floor.
2. The (external) water drain hose is not
installed properly.
3. The fluff filter(s) is / are clogged.
4. The door seal is soiled.
D
RYING LEVEL HAS NOT BEEN REACHED
1. The fluff filter(s) is / are clogged.
2. The water container is full.
3. Selected programme is unsuitable.
4. Load volume is too big.
M
ALFUNCTION
(
)
S
T
HE APPLIANCE DOES NOT WORK AT ALL
»-
PAUSE
BUTTON
U
NCOMMON SOUND DURING OPERATING
W
ATER LEAKAGE
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
5. Compare the data on the model plate
with the data of your energy supplier.
was
7. Press the « S
1. Realign the appliance properly.
2. Realign the appliance properly.
3. Select a drying programme suitable
for the laundry to be dried.
4. Clean the fluff filter(s).
5. Check that the appliance is not
overloaded.
.
1. Align the appliance horizontally.
2. Install the (external) water drain hose
properly.
3. Clean the fluff filter(s).
4. Clean the door seal.
/
DRYING
1. Clean the fluff filter(s).
2. Empty the water container.
3. Select a drying programme suitable
for the laundry to be dried.
4. Reduce the load.
~
~
82
M
(
)
EASURE
S
.
/
»-
TART
PAUSE
BUTTON
.
-
TIME IS TOO LONG
.
.