Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Operation
VORSICHT! Do not use the appliance without fluff filter(s) installed.
During the drying process, water can accumulate between the door
window and the seal. This process does not affect the proper operation of
the appliance.
5.1 Before the first use
When the appliance is used for the first time or after a long period of time, the
appliance may generate a vibrating noise. This is normal and does not indicate a
malfunction. The vibrating noise disappears after a few minutes of programme
operation.
To remove potential residues in the drum of the appliance caused by production,
testing or transportation of the appliance, the time programme « W
be started for 30 minutes before the first regular drying process.
1. Connect the appliance to the mains.
2. Open the door.
3. Put some damp cloths in the drum of the appliance.
4. Close the door.
5. Switch on the appliance using the « O
switched on.
6. Set the time programme « W
7. Press the « P
ROGRAMME DURATION
until a drying time of 30 minutes is displayed.
8. Press the « S
TART
9. When the drying programme is finished, an acoustic signal sounds and the display
indicates « E
ND
10. When the drying programme is finished, turn the rotary knob for the programme
selection back to « O
the « O
/ O
» -
N
FF
5.2 Instructions for the drying of laundry in a dryer
NOTICE! Always observe the textile labels!
❖ Do not dry the following items in your appliance:
➢ net curtains, wool, materials with metal-made or metal parts
» using the
ARM
/ P
» -
AUSE
BUTTON
».
(ger.: Aus) » and switch off the appliance completely using
FF
.
BUTTON
/ O
» -
N
FF
BUTTON
ROTARY KNOB
(ger.: Programmdauer) »-
to start the programme.
~
~
67
» should
ARM
. The dryer is now
.
repeatedly
BUTTON
Werbung
