1. Switch on the appliance using the « O
2. Set a drying programme suitable for the laundry to be dried and set the desired
additional function(s).
3. Press the « D
ELAYED PROGRAMME START
until the desired delay period (1 h - 24 h / desired end of the drying programme
in h)is indicated on the display.
Each press of the « D
delay period by one hour.
4. Press the « S
TART
5. As soon as the count-down time has reached the starting time of the drying
programme, the drying programme starts and the display indicates the remaining
drying time.
6. If you wish to cancel the delayed programme start after pressing the
« S
/ P
TART
AUSE
must switch off the appliance using the « O
➢ It is 2:00 p.m. (24-hours display: 14:00 o'clock)
➢ You set a drying programme with a running time of 2.00 hours.
➢ The drying programme is to end at 5:00 p.m. (24-hours display: 17:00 o'clock).
➢ You set the delay period to 3 hours (2:00 p.m. → 5:00 p.m. = 3 hours).
➢ The drying programme starts at 3:00 pm (15:00 o'clock) and ends at 5:00 pm
(17:00 o'clock).
The « D
ELAYED PROGRAMME START
available for all programmes (depending on model).
If the selected drying programme cannot be combined with the desired functions,
these functions cannot be selected or will be cancelled and the indicators switches
off automatically.
5.4.4 Activation of the crease protection
F
UNCTION
❖ Using this function, you can activate the crease protection for a drying
programme.
❖ C
REASE PROTECTION
textiles from creasing. The drum rotates intermittently during the drying
programme to protect textiles from creasing.
ELAYED PROGRAMME START
/ P
»-
AUSE
BUTTON
»-
(but before the drying programme has started), you
BUTTON
« C
REASE PROTECTION
SELECTION OF CREASE PROTECTION
(ger.: Knitter Schutz): The crease protection protects
/ O
» -
N
FF
BUTTON
(ger.: Ende in) » -
after you have set the delay period.
/ O
» -
N
FF
E
XAMPLE
(ger.: Ende in) » -
(ger.: Knitter Schutz) »:
~
~
73
.
BUTTON
» -
increases the
BUTTON
.
BUTTON
may not be
FUNCTION
repeatedly