Disposal - Medion P1200 Bedienungsanleitung

Note during transport that:
 Where possible, always transport the appliance up-
right. After transportation, only connect to the mains
and turn on after 24 hours so that the refrigerant cir-
cuit can settle after transportation.
 Always empty the condensate tank and the conden-
sate drain hose before storage and transportation.
 Press the
button to switch on the appliance.
 Select the fan mode on the air conditioner or using the remote control. The
operating light is illuminated.
 Keep the appliance running in fan mode for a few hours so that it dries com-
pletely from the inside.
 Press the
button to switch off the appliance.
 Pull the mains plug out of the socket.
 Remove the exhaust air hose and window kit.
 Remove and clean the filter strainers and allow them to dry out completely.
 Insert the filter strainers back into the frames provided for this in the housing.
 Remove the batteries from the remote control.
 If possible, store the appliance and accessories in the original packaging in a
dark, ventilated, dry and frost-free interior.
 Store the appliance in a room without continuously operating heat sources (for
example naked flames, gas appliance or electric heating).
. Disposal
Observe the following labels on the
waste separation with the abbreviations (a) and numbers (b):
1–7: plastics/20–22: paper and cardboard/80–98: composite materials
(France only)
The "Triman" symbol tells the consumer that the product can be recy-
cled, is covered by an extended system of manufacturer's responsibility
and must be sorted by material type in France.
PACKAGING
Your appliance has been packaged to protect it from dam-
age in transit. The packaging is made of materials that can
be recycled in an environmentally friendly manner.
labels on the packaging materials regarding
: paper and cardboard/80–98: composite materials
DE
FR
NL
ES
IT
EN
225