Using The Appliance - Philips HR7750 Gebrauchanweisung

ENGLISH
8
For application times, please refer to the
tables further in these instructions for use.
Unplug the appliance immediately after use.
Note that it is not possible to use the
bowlfunctions when the blender is attached.

Using the appliance

Food processing bowl
C
1 Mount the bowl on the food processor by
1
turning the handle in the direction of the
arrow until you hear a click.
2
CLICK
C
1
2 Put the lid on the bowl.Turn the lid in the
2
direction of the arrow until you hear a
click (this requires some force).
CLICK
Built-in safety lock
The motor unit, the bowl and the lid have been
provided with marks.The appliance will only
function if the dot on the motor unit is placed
directly opposite the dot on the bowl.
C
1 Make sure that the line on the lid and the
CLICK
line on the bowl are directly opposite each
other.The projection of the lid will
complete the shape of the handgrip.
Feed tube and pusher
C
1 Use the feed tube to add liquid and/or
solid ingredients. Use the pusher to push
solid ingredients through the feed tube.
C
2 You can also use the pusher to close the
feed tube in order to prevent ingredients
from escaping through the feed tube.
Metal blade
The metal blade can be used for chopping,
mixing, blending and pureeing.
C
1 Remove the protective cover from the
blade.
The cutting edges of the blade are very sharp.
Avoid touching them!
C
2 Put the tool holder in the bowl and the
blade on the tool holder that stands in the
bowl.
3 Put the ingredients in the bowl. Pre-cut
large pieces of food into pieces of approx.
3 x 3 x 3 cm. Put the lid on the bowl.