Automatic Milk Frother Cleaning (Monthly) - Saeco Intelia Deluxe HD8904 Bedienungsanleitung

Automatic milk frother cleaning (monthly)

1
1
2
1 Pour the contents of a Saeco milk circuit cleaning sachet into a jug. Add a
half litre of water.
2 Insert the suction tube into the jug.
3 Place a container under the automatic milk frother.
4 Press the MILK FROTH button.
5 You can press OK to stop or let the machine dispense until it stops
automatically.
6 Rinse the jug with fresh water and fill it with a half litre of fresh water for
the rinsing cycle. Empty the container and place it back under the
automatic milk frother.
7 Insert the suction tube into the jug.
8 Press the MILK FROTH button.
9 You can press OK to stop or let the machine dispense until it stops
automatically.
10 Remove the automatic milk frother from the steam wand. Remove the
rubber grip from the steam wand.
Warning: The steam wand can be hot after use.
11 Remove the suction tube.
12 Remove the automatic milk frother by pressing on the sides.
13 Remove the rubber lid.
14 Rinse the components with lukewarm water.
Note: You can also clean these components in the dishwasher.
English
17