Saeco Intelia Deluxe HD8904 Bedienungsanleitung Seite 10

English
10
ON
A Q U A
CLEAN
OFF
0/8
100%
AQUA
CLEAN
16 Immerse the AquaClean filter upside down in a jug with cold water and
wait until no more air bubbles come out.
17 Remove the water tank from the machine, empty it and insert the filter
vertically onto the filter connection.
18 Fill the water tank with fresh water and slide it back into the machine.
19 Press the OK button.
20 Select ON on the display and confirm the activation by pressing the OK
button.
Note: When activation is finished, the display shows a tick to confirm
activation.
21 The display shows the filter ready icon to indicate the AquaClean filter
has been installed correctly.
22 To rinse the filter, press the HOT WATER button and let half a litre of
water flow out from the hot water/steam dispensing spout. Discard this
water.
Note: It can take a while until water comes out of the hot water
dispensing spout. The filter needs to be fully filled and rinsed with water.
The machine is ready for use.
Note: After installing the AquaClean filter, you do not have to perform the
manual rinsing cycle.