Sub-Menu "Management - R-Biopharm RIDA QUICK SCAN II Bedienungsanleitung

®
RIDA QUICK SCAN II
Version 1.1
Device Setup
This function allows the setup of the display language, date and time, display brightness. Users can
be created and selected under the menu item "User Management". The language versions German,
English, French, Spanish, Italian and Portuguese are available.
If at least one user has been created, the RIDA
user or to continue without a user.
Device Information
Displays the serial number, firmware version, manufacturer and free memory space.

4.6 Sub-Menu "Management"

Fig. 5: Overview Sub-Menu Management
Backup
All of the files in the RIDA
with the same name and device serial number on a connected USB flash drive. The files are saved
in the format
[(Method)(Lot No.) – (Date)(Time)].XXX
whereby for a file name the following endings (XXX) are possible:
PGM: Gray-scale image of the test strip
XML: Complete test result as XML file
TXT: Complete test result as text file
In addition, a further XML file is created, which has the character combination "-RES-" (for "result")
in the file name instead of the hyphen. Only the pure result data are saved in this file.
Lot / Method
Selection of the read-in procedure: with barcode or RFID (with connected reading device) or via
USB (with USB flash drive plugged in).
In the sub item "Delete Lot / Method" individual lots or methods can be selected and deleted.
30
|
Bedienungsanleitung/User manual
®
QUICK SCAN II starts with the prompt to select a
®
QUICK SCAN II directory "measurements" are backed up in a directory