General Information; Important Information; Explanation Of Symbols Used - R-Biopharm RIDA QUICK SCAN II Bedienungsanleitung

®
RIDA QUICK SCAN II
Version 1.1

General information

Please carefully compare the contents of this delivery with the enclosed delivery note, the package
leaflet or the invoice. We recommend that you keep a copy of this document together with the
instructions, so that you can quickly access information about the date and scope of delivery in case
of future queries, re-orders or service work.
Please be sure to remove all small parts from the packaging material.
We wish to inform you that our devices are adjusted at the factory and can be used immediately
after installation.
®
Before using the RIDA QUICK SCAN II for the first time, please read the operating
instruction carefully. We recommend that it always be kept with the RIDA

Important information

®
The RIDA QUICK SCAN II is an in-vitro diagnostic device within the meaning of the German
Medical Products Act (§3, Paragraph 4 MPG) if it is used for the purpose intended by the
manufacturer, namely for examination of samples obtained from the human body.
According to the Regulations for Operators of Medical Devices (§2 Paragraph 5 MPBetreibV), users
of medical products must ensure that these are functional and in good condition. In addition, the
user must observe the operating instructions as well as other safety-related information and
maintenance information.
The manufacturer of the in-vitro diagnostic device is not responsible or liable for information,
evaluations, diagnoses, etc. which are obtained by the use of the in-vitro diagnostic device.

Explanation of symbols used

In these operating instructions, special information is highlighted by the use of symbols:
Safety information
Important!
Incorrect operation may result in damage to the equipment or its accessories!
Caution!
Danger due to electrical voltages!
Explanatory note
24
|
Bedienungsanleitung/User manual
®
QUICK SCAN II.