Setting Menu - Alber e-fix E35 Gebrauchsanweisung

5.3.7 Setting menu

9:30 28.06.14
Select the setting menu and press the menu function button [16]. This takes you to a sub
menu with the settings Screen brightness, Bluetooth, Lang.selection, Date/Time, Signal
tone, Units and Programming.
Each of these options has an associated sub menu in which you can apply the settings
described in the following.
As already described in the previous chapters, parameters can be specified and activated
or deactivated using the joystick. Similarly, as you already know, you can navigate and
Setting
save parameters using buttons [15] (save), [16] (jump to a sub menu) and [17] (go back
a level without saving).
Select Back
Screen brightness sub menu
By moving the joystick [14] to the left or right you can reduce or increase the brightness
of the screen displays.
Bluetooth sub menu
View the device name and MAC address (Bluetooth chip).
Example: e-fix - 1986
Lang.selection sub menu
29
By moving the joystick [14] to the left or right you can set the language to be used in
the display screens.
Date/Time sub menu
By moving the joystick [14] to the left or right you can navigate through the individual
parameters.
By moving the joystick [14] forwards or backwards you increase or reduce the parameters.
You can only edit those parameters that are shown in the display in grey.
Signal tone sub menu
By moving the joystick [14] to the left or right you can switch the control unit signal
tones on or off.
Units sub menu
By moving the joystick [14] to the left or right you can display the individual details in
metric or imperial measurements.
Programming sub menu
Your specialist dealer has exclusive access to this sub menu to modify or customise para-
meters relating to the user features of the e-fix.