Standard Scope Of Delivery; Optional Accessories; The Main Elements At A Glance - Alber e-fix E35 Gebrauchsanweisung

!
It is prohibited to drive so-called "wheelies" (taken-off anti-tippers from the wheelchair, e-fix wheels on the floor,
front wheels (castors) of the wheelchair hovering in the air). The Alber GmbH refuses to take over any liability for
accidents caused by this kind of driving.

1.7 Standard scope of delivery

• Two e-fix wheels
• Control unit including handrest
• Control unit bracket
• Battery pack
• Battery holder for the battery pack incl. motor supply lines
• Battery charger
• This operating manual
• Immobiliser key
The wheelchair must have special brackets to attach the e-fix wheels. If it does not, please contact your specialist dealer or an Alber
representative.

1.8 Optional accessories

• Intuitive attendant control
• Swivel arm for the control unit
• Opti-Box
• Speed-Stop/Speed limit switch
• Various joystick options
• Various battery packs
We recommend using only original accessories supplied by Alber.
The e-fix is designed in such a way that it performs best when using Alber original accessories. Alber GmbH shall not be liable for damage
to the product or accidents (e.g. fires) caused by a malfunction of non-original accessories or spare parts. The warranty does not cover
repairs for damage caused by malfunction of non-original accessories. Alber GmbH will, however, carry out such repairs for you at a charge.

1.9 The main elements at a glance

(please fold out overview drawing in document cover)
Wheelchair and e-fix wheel
Bracket on wheelchair
e-fix wheel
Viewing panel on the e-fix wheel
Releasing device
Coupling ring
Wheelchair parking brake
Battery holder
Battery pack
Control unit
Wheel socket
Stub axle
Torque plug
Wheel receiver
Control unit
Joystick
On/off button close range lighting
On/off button menu function
On/off button warning signal
Display
On/off button entire system
Immobiliser
Lighting (beneath the control unit)
Rotary switch for preselecting the speed
Plug with connection cable
Immobiliser key
• Spoke cover
• External charger socket
• External On/Off switch
• Bumper bar for the control unit
Battery and battery holder
1 Handle
2 Info button
3 Capacity indication
4 Fault indication
5 Socket for connecting the control unit,
6 the attendant control and the charger
7 Insertion aid on the battery holder
8
9 Charger
10 Charger
11 Charger mains plug
12 Charger plug
13 LED display
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
5