Before First Use; Initial Cleaning; Daily Use - Zanussi ZOB463 Benutzerhandbuch

Before first use

Warning! Refer to "Safety information" chapter.

Initial Cleaning

• Remove all parts from the appliance.
• Clean the appliance before first use.
Important! Refer to chapter "Care and Cleaning".
Setting the time
You must set the time before you operate the oven.

Daily use

Warning! Refer to "Safety information" chapter.
To use the appliance, push the control knob. The control
knob comes out.
Activating and deactivating the appliance
1. Turn the knob for the oven functions to an oven
function.
The power indicator comes on while the appliance
operates.
Oven Functions
Oven function
OFF position
Conventional cooking
Top heating element
Bottom heating ele-
ment
Heats both from the top and bottom element. To bake and roast on one oven level.
Heats only from the top of the oven. To finish cooked dishes.
Heats only from the bottom of the oven. To bake cakes with crispy or crusty bases.
When you connect the appliance to the electrical supply or
after a power cut, the indicator for the Time function flash-
es.
Press the + or - button to set the correct time.
After approximately five seconds, the flashing stops and
the display shows the time of day you set.
When you change the time, you must not set the
Duration or End
Preheating
1.
Set function and maximum temperature.
2. Run an empty oven for 45 minutes.
3.
Set function and maximum temperature.
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface. Ac-
cessories can become more hot than in normal use. Dur-
ing this period an odour and smoke can be emitted. This
is normal. Make sure the airflow is sufficient.
2. Turn the knob for the temperature to a temperature.
The temperature indicator comes on while the tem-
perature in the appliance increases.
3. To deactivate the appliance, turn the knob for the
oven functions and the knob for the temperature to
the Off position.
Application
The appliance is OFF.
function at the same time.
5