Herunterladen Inhalt Inhalt Diese Seite drucken

Skylotec R-052 Gebrauchsanleitung Seite 8

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
damage the textile of the rope and the strength of the rope is no
longer guaranteed.
Recommendation of service life under optimal storage conditions:
never used: Max. ten years
low used (1 - 2 x year): up to seven years
occasionally used (once a month): up to five years
used regularly (several times a month): up to three years
Frequently used (every week): up to a year
intensive use (daily): less than a year
NOTE: The product liability of the manufacturer does not cover
property damage and personal injury, which may occur even with a
proper function and appropriate use of personal protective
equipment against fall. In case of alterations at the equipment as
well as non-observation of these instructions or the valid accident
prevention rules, the extended product liability of the manufacturer
shall be no longer applicable.
Marking and Symbols
Single rope: Ropes marked with this symbol offer sufficient
1
safety when used as a single strand.
Half rope: Ropes marked with this symbol have to be used
1/2
parallel (both strands). Half ropes may be clipped alternately into
belay points to reduce rope friction.
Twin rope: Ropes marked with this symbol have to be used
parallel (both strands). Both strands must be clipped into belay
points.
EN 892: European Standard for climbing ropes. Products marked
with this standard conform to all requirements for dynamic
mountaineering ropes.
: This symbol confirms that the product meets safety
requirements of module D of EU directive 2016/425. The number
following the symbol (e.g. CE 1019) is the number of the notified
body which performs checking production control: VVUÚ, a.s.,
Pikartska 1337/7, 71607 Ostrava-Radvanice, Czech Republic.
Identification and guarantee certificate
(Please fill in before initial use) (B) Product designation (type) /
Version, (C) Item number, (D) Serial number, (E) Month and year of
manufacture, (F) Standard(s) and year, (G) Max. load, (K)
Material(s), (L) Date of purchase, (M) Initial use, (N) User, (O)
Company
EU type- examination by VVUÚ Ostrava-Radvanice, Czech
Republic
EU conformity to type by VVUÚ Ostrava-Radvanice, Czech
Republic
The complete declaration of conformity can be found at the
following link can be accessed:
www.skylotec.com/downloads
8 8
Inhaltsverzeichnis
loading

Inhaltsverzeichnis