Configuration
Support of special PS/2 keyboards
The KVM switch supports the following PS/2 special keyboards:
PixelPower Clarity (blue)
SKIDATA1
If you apply such a keyboard at the console, you can enable the support of these key-
boards in the KVM switch.
How to enable/disable the support of special keyboards:
1. Press
Ctrl+Num
2. Press
to open the menu.
F1
3. Use the
Arrow keys
4. Use the
Arrow keys
IMPORTANT:
A yellow
keyboard is highlighted, the keyboard is treated as standard keyboard.
5. Select the keyboard layout you want to disable/enable, and press
6. Leave the menu by pressing
7. Press
F1
to save your settings.
Resetting the defaults
This function resets the defaults of the KVM switch. After you perform the function,
all defaults are active again.
How to reset the defaults:
1. Press
Ctrl+Num
2. Press
F1
to open the menu.
3. Use the
Arrow keys
4. Use the
Arrow keys
5. Press
Esc
to cancel the function or
47 · G&D DVIMUX8-OSD-PS/2
(standard) to open the On-Screen Display.
to select
System Config
to select
PS/2 Keyboard Type
highlights the active special keyboard. If no special
X
Enter
.
(standard) to open the On-Screen Display.
to select
System Config
to select
Set System Defaults
and press
Enter
and press
and press
Enter
and press
Space
to reset the defaults.
.
.
Enter
.
Space
.
Enter
.