Positioning; Fixing Of The Glass Dome; Assembly Of Accessories - Hensel Eh mini P Led Speed Blitzkopf Bedienungsanleitung

User manual // EH Mini P LED Speed Flash Head
5:
Tilting head
Glass dome
32
starting it up. This prevents internal shortcuts caused by
eventually condensing water.

Positioning

5c
EH Mini P LED Speed flash heads come with a standard
tilt bracket 5. The bracket can be attached to a stand,
pantograph, etc. Now, the flash head can be horizontally
turned 360°. By tightening the knurled-head screw 5b, it is
locked in position and fastened to the stand. The safety
screw is inserted into the respective drilled hole 5c. The
positionable locking grip 5d is used for tilt adjustment.
Lubricating the thread from time to time eases operation.
The umbrella holder 5e is integrated above the tilt bracket.

Fixing of the glass dome

Attention: The glass dome should only be fixed or
removed after having switched the unit off and
disconnected from the power pack. Please take care
that the flash tube and the modeling light won't be
damaged.
The glass dome is fixed by means of the three pre-
mounted springs. To do this, please tilt the glass dome
slightly and insert it into one of the three springs.
Then press the glass dome gently into the other two
springs until it has clicked in completely. For removing the
glass dome, please tilt it slightly again so that it will slip
out easily of the two fixing springs. Then gently loose the
glass dome from the remaining third spring and remove it
from the fixing device.

Assembly of accessories

Reflectors and softboxes
EH Mini P LED Speed flash heads are equipped with a
reflector quick-change mechanism and can be used with
5
5a
5
HENSEL-VISIT GmbH & Co. KG