Starting Up - Hensel Eh mini P Led Speed Blitzkopf Bedienungsanleitung

7
HENSEL-VISIT GmbH & Co. KG

Starting up

Safety hints for operation with flash heads
To avoid damage to the flash tube, mount reflectors and
lightformers (softboxes, etc.) before use and turning on
the unit. Do not move lamp heads around while they are
operating. Turn flash head and power pack off for each
change of reflectors or to move the lamp head to another
location.
Caution: reflectors, speedrings and other accessories
heat up during longer operation. To avoid injuries, handle
with isolating cloth or wait until parts have cooled down.
A damaged flash tube poses serious danger because
the electrodes which carry high voltage are exposed.
The generator must be switched off immediately and
the flash head must be disconnected from the
generator. The EH Mini P LED Speed flash heads come
with a plug-in style flash tube that you can change
yourself when observing all safety precautions.
Please see chapter 9 (Maintenance) for changing the
flash tube.
Assembly
When mounting to a ceiling system or a pantograph, the
suspended head has to be double secured from falling
down. This is done by tightening the safety screw (not
included in the standard delivery) into the thread of the
Hensel tilting head.
Due to the existing safety regulations, it is, however,
necessary to use a steel cord (code no. 7690) for further
security.
The safety rope has to be led through the handle on the
back of the unit, which then has to be fastened on a
suitable part of the boom or the rail system.
User manual // EH Mini P LED Speed Flash Head
29