Register Hs Menu - Medion LIFE S63064 Anleitung

DE

Register HS menu

 Choose the "Register HS" entry in the menu and confirm with "Select".
 Four base stations are available. In the factory settings, the first one is
assigned.
 Enter the system PIN with the keypad and confirm with "OK".
 The default setting for the system PIN is: "0000". To change the PIN: Page
61.
 Press the paging button on the base station and hold it down for approx.
10 seconds. After hearing the signal tone, you can release the button.
If the registration has been successful, the internal number of the handset will
appear on the display.
If the base is too far away from the handset, the message "No Base" will
appear.
It is also possible to register other DECT-GAP telephones with the base. Refer
to the respective manufacturer's instructions.
EN
63