Maintenance - Texas A/S SNOWBUSTER 1100E Bedienungsanleitung

Auger unit
The drive shaft on auger is secured by shearing bolts. The shearing bolts will break, if the auger strikes
any hard object, this is to prevent the snow blower from sustain further damage. Two spare bolts with
nuts are supplied on the control panel.
Warning: Do not replace the shearing bolts with other types of bolts!
If the chute discharger is blocked: Shut the engine down.Ensure all rotaring parts has come to an
complte stop. Clean the Chute and auger unit using the cleanout tool.

MAINTENANCE

Importance of maintenance
Good maintenance is cost-saving and essential for safe and trouble-free operation.
WARNING
Improper maintenance or failure to comply
with instructions, precautions can result in
serious injury or death. Always follow the
manual prescribed procedures and
precautions
To ensure a proper upkeep of your machine, the following pages include a maintenance schedule and
description plus an inspection procedure of your machine. For tasks that are more difficult, or require
special tools, maintenance should be carried out by technician or qualified mechanic.
Maintenance safety
As with any type of power equipment, carelessness or error on the part of the operator can result in
serious injury. It is impossible to warn against all hazards or hazardous situations, it is therefore
important that the user of the machine exhibits vigilance to operate the machine safely and rationally to
avoid bringing yourself and others in danger.
Safety precautions
Important: Before commencing any maintenance or repair ensure that the engine is shutdown
To reduce the possibility of fire or explosion, be careful when working around gasoline. Use only a
nonflammable solvent, not gasoline, to clean parts. Keep cigarettes, sparks and flames and other
sources of ignition away from the machine.
34