Function; Operation 1100E - Texas A/S SNOWBUSTER 1100E Bedienungsanleitung

FUNCTION

Handle with embedded heat
Push the heater button on the control panel to turn the heater for the handles on.
Front light
Push the front light button to turn the headlight on.

OPERATION 1100E

Important! Clear and secure the work area. The operator of the snow blower can and will be held liable
for personal injury or damage on property to injured party.
First stage : Preperation
1. Push the throttle on full power (fast-rabbit)
2. Adjust the vertical throw out angle of the chute, using chute rod knob (4)
3. Adjust the horizontal throw out angle of the chute, using chute
discharger control knob (13) on the leftside of the control panel.
Warning: Never direct discharge at bystanders or allow anyone in front of unit.
Caution: The ejection range is 10 and 15 meter from the snow blower.
Second stage: Sweeping
1. Pull the right-hand control lever to engage the drive unit and the snow blower will start to move.
2. Use the 6 forward gears and 2 reverse (R1 and R2) to achieve the desired working speed.
3. Push the left-hand control lever to engage the auger unit.
Note: Do not overload machine capacity by attempting to clear snow at too fast a rate.
Advice: Select a slower speed for wet heavy snow, and a higher speed for light powdery snow.
Warning!

Exercise extreme caution when operating on crossing gravel drives, walks, or roads.

Do not clear snow across the face of slopes.

Exercise extreme caution when changing direction on slopes.

Do not attempt to clear steep slopes.
33