Putting On And Exchanging The Attachments; Pureeing; Storage - Bamix basic Gebrauchsanleitung

Blending
Dip bamix at an angle in the ingredients, switch it on and blend.
Before removing the appliance from the ingredients, switch it off
to prevent splashing.
Tip: Whilst working, hold your free hand over the top of the jug to
prevent ingredients spraying out.
Cleaning and care
Cleaning is very easy. Remove the attachment and clean it. It is
enough to clean the chromium-plated part of the appliance after
every use under running water (do not switch on). The easiest way
to clean off bits of food which have stuck to bamix is to hold it in
a jug with hot water and switch it on. Take care that the switch
does not come in contact with water.
Important: Clean the appliance as soon as you have finished
working, to prevent the drive shaft getting clogged.
What can be done...
if the drive shaft of your appliance no longer rotates?
When you have not used your appliance for some time, the drive
shaft may get stuck due to minute foodstuff residues which have
hardened and are now gumming up the lower shaft bearing.
Place the operative part of the appliance for 5 to 10 minutes in a
jug with hot water, then switch it on. In general the appliance will
then work again; if not, just try to free the shaft carefully with pliers.
19