Setting The Pressure; Using The Appliance; Adapters - Parkside Pak 20-Li C3 Originalbetriebsanleitung

♦ To switch off the display indicator
ON/OFF button
NOTE
► The compressor will not work if the display
indicator is switched off .
NOTE
► The LED work light
you press the ON/OFF switch
illumination of the working area while inflat-
ing in low light conditions .

Setting the pressure

♦ Hold down the "+"
display flashes .
♦ Press the "+" or "–"
desired pressure .
♦ Once you see the desired pressure on the
display indicator
for about 3 seconds .
The desired pressure is now set .
NOTE
► The display indicator
compressor) switches off after around three
minutes of inactivity .
NOTE
► If you press and hold the "+"
button, the pressure changes quickly .
■ 8 │ GB │ IE
, press the
for 3 seconds .
lights up as soon as
. This allows
or "–" button until the
button to set the
, do not press any button
(and also the
or "–"

Using the appliance

♦ Loosen the cap nut
completely!), twist in the compressed air hose
threaded connection
cap nut .
♦ Select the desired pressure .
♦ Push one of the supplied adapters ( ,
, , ) firmly onto the compressed air hose
adapter .
♦ Connect the adapter
to the object you want to inflate .
♦ Press the ON/OFF switch
♦ The compressor switches off automatically when
you reach the preset pressure .
♦ Pull the adapter
the now inflated item .

Adapters

Adapter
The ball needle can be used to inflate various balls .
Adapter
The Presta valve can be used for inflating bicycle
tyres .
Adapter
The Dunlop valve can be used for inflating bicycle
tyres .
Adapter
The universal adapter can be used to inflate air
mattresses or similar .
Adapter
For inflating pool toys, etc .
Adapter
The universal adapter can be used to inflate air
mattresses or similar .
(do not unscrew it
and retighten the
, , , , or
.
, , , , or
PAK 20-Li C3
, ,
out of