English
en
Safety
Read this manual carefully before starting or using the device. Always
store the manual in the immediate vicinity of the device or its site of use.
Warning
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
•
Do not use the device in potentially explosive rooms or areas and do not
install it there.
•
Do not use the device in aggressive atmosphere.
•
Do not immerse the device in water. Do not allow liquids to penetrate
into the device.
•
The device may only be used in dry surroundings and must not be used
in the rain or at a relative humidity exceeding the operating conditions.
•
Do not point the device at intense energy sources, such as the sun or
laser radiation, in order to avoid damage to the device.
•
Protect the device from permanent direct sunlight.
•
Do not open the device.
•
Do not remove any safety signs, stickers or labels from the device. Keep
all safety signs, stickers and labels in legible condition.
•
Observe the storage and operating conditions (see Technical data).
Intended use
Only use the device for visual or thermographic representation of objects
whilst adhering to the technical data.
Any use other than the intended use is regarded as misuse.
Reasonably foreseeable misuse
Do not use the device in potentially explosive areas. Trotec accepts no liability
for damages resulting from improper use. In such a case, any warranty claims
will be voided. Any unauthorised modifications, alterations or structural
changes to the device are forbidden.
Personnel qualifications
People who use this device must:
•
have read and understood the instructions, especially the Safety
chapter.
Safety signs and labels on the battery
Warning of explosion risk!
These symbols indicate the following:
Do not expose the battery pack or tool to fire or excessive
temperature! Do not let the battery come into contact with water or
fire! Avoid direct sunlight and moisture. There is a risk of explosion!
Do not open the appliance!
This symbol indicates the following:
This device may only be repaired and serviced by the manufacturer.
Any unauthorised modifications, alterations or structural changes to
the device are forbidden.
Risk of injury due to electrical voltage. Damage to the device may
occur.
Observe the correct disposal of the battery!
This symbol indicates the following:
Ensure that the battery is disposed of correctly and never dispose of
it in waste water or public waters.
The battery contains irritating, caustic and toxic substances that
pose significant risks to people and the environment.
6
Residual risks
Warning of electrical voltage
There is a risk of a short-circuit due to liquids penetrating the
housing!
Do not immerse the device and the accessories in water. Make
sure that no water or other liquids can enter the housing.
Warning of electrical voltage
Work on the electrical components must only be carried out by an
authorised specialist company!
Warning of explosive substances
Do not expose the batteries to temperatures above 60 °C! Do not
let the batteries come into contact with water or fire! Avoid direct
sunlight and moisture. There is a risk of explosion!
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may use it as a
dangerous toy.
Warning
The device is not a toy and does not belong in the hands of
children.
Warning
Dangers can occur at the device when it is used by untrained
people in an unprofessional or improper way! Observe the
personnel qualifications!
Caution
Lithium-ion batteries might catch fire in case of overheating or
damage. Ensure a sufficient distance to heat sources, do not
subject lithium-ion batteries to direct sunlight and make sure not to
damage the casing. Do not overcharge lithium-ion batteries. If the
battery is not permanently installed in the device, only use smart
chargers that switch off automatically when the battery is fully
charged. Charge lithium-ion batteries in due time before they are
discharged completely.
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to extreme
temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the device.
Wärmebildkamera IC200/IC300
EN