Safety Information - Oase OptiMax 2000 Gebrauchsanleitung

Safety information

Electrical connection
• Only connect the unit if the electrical data of the unit and the power supply match.
• Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated fault cur-
rent of max. 30 mA by means of a fault current protection device.
• Protect open plugs and sockets from moisture.
Safe operation
• Do not use the unit, if electrical lines or the housing are damaged.
• Dispose of the unit if its power connection cable is damaged. The power connection cable cannot be
replaced.
• The impeller unit in the pump contains a magnet with a strong magnetic field that may affect the
operation of pacemakers or implantable cardioverter defibrillators (ICDs). Keep a distance of at least
0.2 m between the implant and the magnet.
• Do not carry or pull the unit by its power cable.
• Route lines in such a way that they are protected from damage and do not present a tripping haz-
ard.
• Never carry out technical changes to the unit.
• Only carry out work on the unit that is described in this manual.
• Only use original spare parts and accessories.
• Should problems occur, please contact the authorised customer service or OASE.
EN
17