Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Channel 2 – Fan
DMX-value:
000 - 127
128 - 255
Continual operation
By operating the switch on the back of the device the continual bubble emission starts.
Remote control operation
By operating the button on the remote control the bubble emission starts.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
Function
Out
Fan switch on
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
15/16
00094129.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
