Using The Phone; 8- Answering Incoming Calls; Without Headset; With Headset (Option) - Geemarc AmpliPOWER 40 Benutzerhandbuch

If you are using this telephone with a
hearing aid, set your hearing aid to
8 – Answering incoming call

Without headset :

- When an incoming call is received the phone will ring and flash,
to answer the call lift the handset and speak.
- On completion of the call, carefully replace the handset in the
cradle to release the line.

With headset (option) :

- When an incoming call is received and if you wish to answer
the call with the headset, press
- On completion of the call, press
the line.

In handsfree mode :

- When an incoming call is received the phone will ring, to
answer the call press
- On completion of the call, press the
the line.
9 – Receiving volume and tone adjustment
You can increase the volume and adjust the receiving tone
according to your own hearing requirements.The button +40dB
allows extrareceiving and tone functions to be activated
or not during the conversation.
When the function is activated, the red light of extra receiving
and tone function located near the button
the TONE and VOLUME buttons to move the level to your own
hearing requirements.

Using the phone

the "T" setting.
button.
8
button and speak.
button again to release
button to release
is lit. Adjust