Cutting Height Adjustment - Ruris Rx 400S Bedienungsanleitung

When the control lever is moved to the frog symbol the engine speed decreases.
CAREFUL!
Operate the lever only when the engine is running. Operating the lever without the
engine running can damage the drive mechanism.
To decrease travel speed, push the lever in the forward direction.
To increase travel speed, pull the lever back.
The travel speed will be suitable according to the working conditions (land and lawn).

CUTTING HEIGHT ADJUSTMENT

NOTE: Your machine is shipped with the cutting height in the low position. Adjust the
cutting height as follows.
The height adjustment lever is located above the right rear wheel. To adjust the cutting
height, move the lever outwards and move it forward or backward one step.
NOTE: For uneven or unstable terrain, move the cutting height to a higher position.
22
mic mare
Maner relaj
Inaltime taiere
EN