Managing Calls; Automatic Call Acceptance; Rejecting A Call - Silvercrest IAN 279754 Bedienungsanleitung

Managing calls

If you have connected two mobile phones to the hands-
free kit simultaneously, you can put one call on hold in
order to take a call from a second mobile phone and
toggle between the two calls.
Note:
If a call comes to the second mobile phone during an
ongoing call, this call will only be signalled on the
second phone.
Press the multifunction button
the call on the second mobile phone while already
talking on the first mobile phone. The first call is put
on hold.
Press the multifunction button
between the two calls. When the current call is finished,
the hands-free kit switches automatically to the second
ongoing call.
Press the multifunction button
current call and automatically accept the second call.

Automatic call acceptance

If automatic call acceptance is activated in the mobile tel-
ephone, it accepts the incoming call after a determined time
period and then passes it on to the hands-free appliance. Fur-
ther information regarding automatic call acceptance is to be
found in the operating instructions for your mobile telephone.

Rejecting a call

Press the multifunction button
to reject an incoming telephone call.
Adjusting the volume of the hands-free appliance
You can adjust the sound volume level of the hands free
device with the +/- buttons
During a conversation, press the + or - button
desired volume level is set. A high-pitched beep signals
that you have reached maximum volume; a low-pitched
beep signals that you have reached minimum volume.
SBTF 10 C3
twice briefly to accept
again twice to toggle
once briefly to end the
for about 3 seconds
.
GB
until the
│
59 ■