F) Select Temperature Unit °C/°F; G) Switch Outdoor Sensors; H) Maximum/Minimum Values; Display Values - Renkforce 1267653 Bedienungsanleitung

f) Selecting the Temperature Unit °C/°F
• Briefly push the button „DOWN/DCF" at the weather station to switch the temperature
unit between °C (degrees Celsius) and °F (degrees Fahrenheit).
• At the outdoor sensor, open the battery compartment and push the button „°C/°F" to
switch the temperature unit between °C (degrees Celsius) and °F (degrees Fahren-
heit).
g) Switching the Outdoor Sensors
When more than one outdoor sensor is logged on to the weather station, briefly push the
button „CHANNEL" to switch between the outdoor sensors and display their measured
values. The respective sensor/channel number is displayed at the lower left..

h) Maximum/Minimum Values

Displaying Values
The weather station saves the extremes for the indoor/outdoor temperatures and indoor/
outdoor humidity. Briefly press the button „MAX/MIN" repeatedly to switch between
the following displays:
• Maximum values (to the right of the measured values, „MAX" is displayed)
• Minimum values (to the right of the measured values, „MIN" is displayed)
• Current measured values
The display of the maximum or minimum values will automatically return to the
display of the current values after several seconds if no button is pushed.
Deleting/Resetting Values
Keep the button „MAX/MIN" pushed for more than 3 seconds. The maximum/minimum
values are deleted/reset.
37