Kesser K-CFH-2022 Bedienungsanleitung Seite 5

CONTROL PANEL VIEW
OPERATION
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on a firm level surface
4. Setting the master button to "O". plug the cord set into a 220-240V~AC electrical outlet.
Turning the master button "-" position, with "BEE" sounds the light is on.
5. Turn the heater ON by pressing the
unit will display the current Room temperature and blow the cold air.
6. Upon pressing the "
temperature(the highest temperature you can set until to 49℃),when the settled
temperature is higher than room temperature, the unit will start one heat setting, and at this
time the "MODE" button will light up with WHITE color.If continue pressing "
settled temperature will be even higher. The unit will totally start 2 heat settings. At this time
the "MODE" button will light up with RED color. Once continue pressing "
temperature reached 49℃, then the temperature restart from 10℃.
7. Press button "MODE" one time pressing is in low heat setting and the "MODE" will light up
with WHITE color. Two times pressing is in high heat setting and the "MODE" will light up with
WHITE color. When pressing this button for third times, it will come back with only cool air
blowing mode.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
5
main button at the back side of the heater. The
" button,and " " button will light up,start set the suitable
www.eshopping.de
" the
" the settled