Setting Mode (For Adjusting Time, Date, °C / °F And Key Tone) - Bresser MeteoTemp Proj Bedienungsanleitung

12. Setting mode (for adjusting time,
date, °C / °F and key tone)
In normal mode, press and hold the [
key to enter the setting mode.
Sequence of setting parameters:
Time offset Hour format (12 / 24)
Minute Year (2000 – 2099)
Month Date °C / °F
Key tone on / off Exit setting mode
1. In setting mode, the parameter that can be
adjusted will blink.
2. To increase a value, press the [
key to raise it by one increment. For faster in-
creases, press and hold the [
NOTE: If you're adjusting minutes, the seconds
will return to 0.
MODE]
Hour
Date format
Weekday language
UP/RCC]
UP/RCC] key.
3. To decrease a value, press the [
key to lower it by one increment. For faster de-
creases, press and hold the [
NOTE: If you're adjusting minutes, the seconds
will reset to 0.
4. To save your chosen setting and move to the
next one, press the [
5. If no changes are made within 20 seconds, the
current settings will be saved, and the device
will exit the setting mode.
NOTE:
• The time offset lets you add or subtract hours
(+23 to -23) from the current time to accommo-
date different time zones with the automatic
clock function.
• By default the key tone is "off".
• You can choose from five languages for the
weekday display: EN, GE, FR, IT, ES
DOWN/RF]
DOWN/RF]key.
MODE] key.
EN
13