Werbung
English
To replace the fabric covering, ensure it is turned
right side out, and stretch the covering over the
rear edge of the cheekpad assembly. Then push the
rectangular collar through the pad assembly and
place it in position. Stretch the rest of the covering
over the front part of the cheekpad assembly
making sure to leave the tab outside the fabric
covering. Adjust the covering to lie smoothly.
To replace cheekpad in helmet, slip pad onto strap.
Then place the tab at the front into the slot on the
helmet side. Push the rear part of pad until the pad
is fully home. Pull the chinstrap to check possible
chinstrap play in the cheekpad.
12
Werbung
