Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Scope of Delivery
Equotip
Live UCI (358 10 021)
®
A Carrying Case
B Equotip Live UCI Probe
C Bluetooth Module (BTM)
D Rechargeable AA Battery
E Micro USB-Cable 0.5m (1.6 ft)
F Wrist Strap
G Documentation
Optional accessories
H Equotip Test Block ~850 HV5
(357 54 100)
I Equotip UCI Special Foot
(356 00 720)
This is a selection of our
accessories. Visit proceq.com or
call your Proceq representative
for more information.
4
Congratulations on your purchase of
Equotip
Live UCI. This instrument
®
has been manufactured to highest
Proceq quality standards.
Getting Started
1. Prepare Probe
Open the battery lid with a screw-
driver or coin and insert
chargeable battery
. Charge the
battery first with the supplied micro
USB-cable on any USB-connector
. A full charging takes around
7.5h. Alternatively, also standard AA
batteries can be used.
Warning! Please do not
!
charge standard AA batteries!
2. Download App
Install the Equotip Live App
from the App Store on your
compatible
mobile
Note: Did you know? You can use
the same app with the Equotip
Live Leeb D solution.
3. Create Account
Create your account in the App or on
live.proceq.com.
Connect and Measure
1. Turn the probe on by pressing one
of the two On/Off buttons
2. Select your probe via the probe
icon in the Equotip
choose connect.
3. It is highly recommended to verify
the probe on a calibrated Proceq
test block using the verification
the re-
feature in the App.
4. Start measuring.
Access the tutorial videos for
important instructions.
Live Sync
Measurement data can be viewed,
edited and exported in the App and
accessed online via live.proceq.com.
Firmware Updates
Please check in the App Store for
updates of the Equotip Live App, or
activate automatic updates in the
device.
iOS settings. The App will inform
you about probe firmware updates.
Download the PQUpgrade tool from
the Proceq website to perform the
update.
.
Live App and
®
© 2017 Proceq SA
Werbung
