Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Key lock
The key lock is to prevent users from making
any unintentional changes to the settings.
Activating the key lock
• To activate the key lock, press and hold
the
key (5) and the
ously for approx. 2 seconds.
You will hear a beep sound indicating the
key lock is now deactivated. You can now
enter your desired settings.
Deactivating the key lock
• To deactivate the key lock, press and hold
the
key and the
key simultaneously
for approx. 2 seconds again.
You will hear a beep sound indicating the
key lock is now deactivated.
Setting the temperature
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
Always ensure the prescribed ambi-
■
ent temperature is maintained (see
"Intended use" on page EN-4).
Select an internal temperature to suit the
wine. Further information on the optimum
storage temperature can be found in the sec-
tion "Maintaining quality" on page EN-16.
You can set the appliance to a temperature
from +5 °C to +20 °C (41 °F to 67 °F).
key (6) simultane-
Operation
• To set the temperature
– higher, press the
until the desired temperature is shown.
– lower, press the
until the desired temperature is shown.
After a short while the flashing will stop and
the desired temperature will be set.
The appliance will adjust itself to the set
temperature while showing the current in-
ternal temperature.
If you set a lower temperature, you will
need higher cooling performance. This
increases the energy consumption.
Changing the temperature unit
You can choose whether the internal tempera-
ture is shown in Celsius (°C) or Fahrenheit (°F).
You can find the current setting on the tem-
perature indicator.
• To change the temperature unit, press the
key (8) and the
ously.
LED light
• To switch the LED on or off, press the
key (6).
Page EN-13
key (8) repeatedly
key (9) repeatedly
key (9) simultane-
Werbung
