Fronius CrashBox mag CMT PAP FL Installationsanleitung Seite 9

Fitting the CrashBox magnetic to the robot
Safety
Incorrectly executed work can cause serious injury or damage.
► The following activities may only be carried out by trained and qualified personnel.
► Observe the safety rules in the power source operating instructions.
Fitting the Crash-
1
1
Box magnetic to
the robot
Secure the robot flange with the screws provided
Tightening torque according to the table on the previ-
ous page
3
3
Attach CMT mounnting bracket
Make sure to fit it correctly in line with the lugs and the
3 grooves on the bellows and flange!
WARNING!
1
2
2
2
1
2
2
1
2
2
2
Secure the magnetic plate with 3 x M4 x 16 mm screws
Tightening torque = 3.3 Nm
4
4
Fit 2-part locking ring
2
2
3,3 Nm
2
9